220V 780W Stainless Steel Electric Band Heater Heating Coil
220V 780W Stainless Steel Electric Band Heater Heating Coil
Classification of electric heating Coil / Band Heater
Stainless steel ceramic electric heating coil / Band Heater
The high temperature ceramic electric heating coil is not made by the general mica threading method, but by the ceramic strip threading method, so the power of the product is 0.5~1.5 times higher than the ordinary one. The heating element is made of imported round wire ceramic into a spring-like ceramic strip. The outer cover is made of stainless steel made in Japan, and the high-temperature heat-insulating cotton (aluminum silicate fiber board) is used in the middle to prevent temperature leakage. Ceramic strips are high-frequency ceramics that have the characteristics of fast heat transfer, hard and non-breakable, high temperature, no deformation and aging. Brief performance of ceramic heating coil: It is mainly suitable for extrusion, casting and undershooting. The operating temperature can reach 450 degrees and the maximum surface load is 6.5W/cm. It is characterized by long life, high temperature resistance, 30% reduction in energy consumption and high insulation. The most suitable electric heating products for extruders, injection molding machines and blown film machines. The ceramic heating ring has the advantages of easy installation, fast heat transfer and good insulation. The production is not limited by the size and size of the model. High working temperature, fast heating, high thermal efficiency, no pollution, uniform heating and accuracy. The specific advantages are as follows:
1. It has a winding property. For example, when heating a container or a pipe, it can be bent into a curved shape or a circular shape to heat the surface, such as heating a large workpiece, and partially recovering the form, and the large-area workpiece can be tiled. Cover form. In addition, it can be adapted to the heating of workpieces of various geometric shapes.
2, high operating temperature, fast heating, high thermal efficiency, no pollution, uniform heating and accurate, can achieve automatic control.
3. High mechanical strength, good thermal insulation performance, large contact surface with heated objects and long service life.
4, installation, maintenance is convenient, the use of low cost, even if the internal heating material is damaged, and the external ceramic device can still be reused.
| Ceramic Band Heater Technology Data | |
| 1. | Electrical |
| 2. | Resistance + 10% -5% |
| 3. | Wattage + 5% -10% |
| 4. | Voltage 220V AC to 480V AC |
| 5. | Maximum Watt 5-7W/cm2 |
| 6. | Maximum Temp. 500o C- 800o C |
| 7. | Dimensional |
| 8. |
Minimum Dia. 50 mm |
| 9. | Minimum Width 25 mm |
| 10. | Overall Thickness 12-15 mm |
| 11. | ceramic strip 2 hole, 3 hole, 5 hole, 6 hole, 7 hole , 8 hole etc |
| 12. | Resisance wire chrome-nickel or FeCrAl as requirement |
Shenzhen Suwaie Technology Co., LTD
ADD:3rd Floor No.29, Huimin 1st Rd. Guihua Community, Guanlan sub-district , Longhua Dist, Shenzhen 518110 China
Tel: +86 755 32948288 Fax: +86 755 32948188
Moblie/WhatsApp/Wechat/Line: 0086 13423886170
Contact Person: Gavin lei
Email:gavin@suwaie.com
Web:www.suwaie.com / www.tubularheatingelement.com
