Immersion Heater For Oil Water Heating with Stainless Steel Explosion Proof Cover
Immersion Heater For Oil Water Heating with Stainless Steel Explosion Proof Cover
Explosion-proof electric heater overview:
Explosion-proof electric immersion heater is an internationally popular high-quality long-life electric heating device. It is used to raise, heat and heat the flowing liquid and gaseous medium. When the heating medium is heated by the electric heater under pressure, the fluid thermodynamic principle is used to evenly remove the huge heat generated in the work of the electric heating element, so that the temperature of the heated medium reaches the user's process requirements.
Working principle of explosion-proof electric heater:
The fluid explosion-proof electric immersion heater converts electrical energy into heat energy to heat the material to be heated. During operation, the low-temperature fluid medium enters its input port under the action of pressure through the pipeline, along the specific heat exchange flow path inside the electric heating vessel, and uses the path designed by the fluid thermodynamics principle to take away the high-temperature heat energy generated in the work of the electric heating element. The temperature of the heated medium is raised, and the electric heater outlet is obtained as a high temperature medium required by the process. The electric heater internal control system automatically adjusts the electric heater output power according to the temperature sensor signal of the output port, so that the medium temperature of the output port is uniform; when the heating element is overheated, the independent overheat protection device of the heating element immediately cuts off the heating power source to avoid Overheating of the heated material causes coking, deterioration, and carbonization. In severe cases, the heating element burns out, effectively extending the service life of the electric heater.
Explosion-proof electric heater application range:
1. Heating of chemical materials in the chemical industry, some powder drying under certain pressure, chemical process and spray drying.
2. Hydrocarbon heating, including petroleum crude oil, heavy oil, fuel oil, heat transfer oil, lubricating oil, paraffin, etc.
3. Process water, superheated steam, molten salt, nitrogen (air) gas, water gas, etc., which are heated by heating.
4. Due to the advanced explosion-proof structure, the equipment can be widely used in chemical, military, petroleum, natural gas, offshore platforms, ships, mining areas and other places where explosion protection is required.
Explosion-proof electric heater features:
1. Small volume and high power: The heater mainly uses clustered tubular electric heating elements.
2. Fast thermal response, high temperature control accuracy and high comprehensive thermal efficiency.
3, high heating temperature: the maximum operating temperature of the heater design can reach 850 °C.
4. The medium outlet temperature is uniform and the temperature control precision is high.
5, wide application range, adaptability: The heater can be applied to explosion-proof or ordinary occasions, the explosion-proof grade can reach dIIB grade and C grade, the pressure can reach 20MPa.
6. Long life and high reliability: The heater is made of special electrothermal material, with low surface power load and multiple protections, which greatly increases the safety and life of the electric heater.
7. Fully automatic control: According to the requirements, the heater circuit design can easily realize the automatic control of the parameters such as outlet temperature, flow rate and pressure, and can be networked with the computer.
8, energy saving effect is significant, almost 100% of the heat generated by electrical energy is transferred to the heating medium
Shenzhen Suwaie Technology Co., LTD
ADD:3rd Floor No.29, Huimin 1st Rd. Guihua Community, Guanlan sub-district , Longhua Dist, Shenzhen 518110 China
Tel: +86 755 32948288 Fax: +86 755 32948188
Moblie/WhatsApp/Wechat/Line: 0086 13423886170
Contact Person: Gavin lei
Email:gavin@suwaie.com
Web:www.suwaie.com / www.tubularheatingelement.com
