Industrial Electric Space Finned Tubular Heater Element With Stainless Steel Pipes

Industrial Electric Space Finned Tubular Heater Element With Stainless Steel Pipes 

Fin electric heater
The finned tubular electric heating element is a metal heat sink wound on the surface of an ordinary component. Compared with the common component, the heat dissipation area is expanded by 2 to 3 times, that is, the surface power load allowed by the fin component is 3 to 4 times that of the common component. . Due to the shortening of the length of the component, the heat loss of the component is reduced, and under the same power conditions, the utility model has the advantages of rapid temperature rise, high thermal efficiency, long service life, small volume of the heating device and low cost. It can be installed in a blow duct or other stationary, flowing air heating 

Flange electric heating element / Tubular heater / Immersion heater
Flange electric heating element (also called plug-in electric heater): U-shaped tubular electric heating element is adopted. According to the heating medium design specification, it is assembled on the flange cover according to the power configuration requirement, inserted into the material to be heated, and the heating element is working. The large amount of heat emitted is transferred to the heated medium to raise the temperature of the medium to the desired process requirements. When the medium temperature reaches the set value required by the process, the control system adjusts the output power of the electric heater according to the temperature sensor signal, and performs temperature control on the resistive load of the heating element. The medium temperature is made uniform to meet the required requirements; when the heating element is over-temperature or low-level, the interlocking protection device of the heating element immediately cuts off the heating power source to avoid burning of the heating element and prolongs the service life. The flange electric heating tube is mainly used for heat preservation and heating of various storage tanks, containers and fuel tanks in petroleum, chemical, food, machinery and other industries. The connection method can be flanged or threaded end face seal 

Specification

Shenzhen Suwaie Technology Co., LTD

ADD:3rd Floor No.29, Huimin 1st Rd. Guihua Community, Guanlan sub-district , Longhua Dist, Shenzhen 518110 China

Tel: +86 755 32948288     Fax: +86 755 32948188

Moblie/WhatsApp/Wechat/Line: 0086 13423886170

Contact Person: Gavin lei

Email:gavin@suwaie.com

Web:www.suwaie.com / www.tubularheatingelement.com